Gestetner dsc332 Operating Guide
B Loading Paper
109
5
B
B
B
B Loading Paper
Important
❒ Tray 1 and LCT use A4 K paper
exclusively. Load only A4 paper at
all times.
all times.
❒ If you want to load Letter- sized
paper (8
1
/
2
"
× 11"K) paper in Tray
1 or LCT, contact your sales or
service representative.
service representative.
Reference
For paper types and sizes, see
p.172 “Copy Paper”.
To load paper in the bypass tray,
see “Copying from the Bypass
Tray”, Copy Reference.
p.172 “Copy Paper”.
To load paper in the bypass tray,
see “Copying from the Bypass
Tray”, Copy Reference.
Note
❒ Fan the paper before loading.
❒ Straighten curled or warped paper
❒ Straighten curled or warped paper
before loading.
Loading Paper into Paper
Trays and Paper Tray Unit
Trays and Paper Tray Unit
Tray 1 uses only A4
K paper. If you
want to load 8
1
/
2
"
× 11"K, contact
your sales or service representative.
The position of the side and end
guides can be changed in tray 2, 1 tray
paper unit, and 2 tray paper unit. Pa-
per of various sizes can then be load-
ed in them.
This section describes loading paper
in tray 2.
The position of the side and end
guides can be changed in tray 2, 1 tray
paper unit, and 2 tray paper unit. Pa-
per of various sizes can then be load-
ed in them.
This section describes loading paper
in tray 2.
AAAA
Pull out the paper tray until it
stops.
stops.
Note
❒ You can change the paper size,
see p.122 “Changing the Paper
Size”.
Size”.
BBBB
Load paper into the tray with the
print side down.
print side down.
Important
❒ Do not stack paper over the lim-
it mark.
ZJKY270J
ZJKY290J
0816JupiterC1GSG_GB_FM.book Page 109 Friday, August 29, 2003 7:56 PM