Gestetner dsc332 Operating Guide
Troubleshooting
110
5
CCCC
Push in the paper tray slowly un-
til it stops.
If a tray is pushed forcefully, the
position of its side guide may shift.
If you load a paper size that is not
selected automatically, you will
need to specify the paper size with
the control panel.
The following paper sizes are not
selected automatically:
• B5 JIS
til it stops.
If a tray is pushed forcefully, the
position of its side guide may shift.
If you load a paper size that is not
selected automatically, you will
need to specify the paper size with
the control panel.
The following paper sizes are not
selected automatically:
• B5 JIS
L
• 8
1
/
2
"
×14"L
• 8
1
/
2
"
×11"L
Reference
p.123 “If you load a paper size
that is not selected automatical-
ly”.
that is not selected automatical-
ly”.
Loading Paper into Large
Capacity Tray (optional)
Capacity Tray (optional)
LCT(optional) uses A4
K paper ex-
clusively. Only load A4
K paper. If
you want to load 8
1
/
2
"
×11"K, contact
your sales or service representative.
AAAA
Pull out the LCT, slowly until it
stops.
stops.
BBBB
With the print side down, align
all four sides of two paper stacks,
and then load them next to each
other in the tray. Each side has a
limit of 1,000 sheets.
all four sides of two paper stacks,
and then load them next to each
other in the tray. Each side has a
limit of 1,000 sheets.
Important
❒ Align the paper stacks and load
them against the left and right
walls, or a paper misfeed might
occur.
walls, or a paper misfeed might
occur.
❒ Do not stack paper over the lim-
it mark.
CCCC
Push the paper tray slowly in un-
til it stops.
til it stops.
ZJKY300J
ZDJY009J
0816JupiterC1GSG_GB_FM.book Page 110 Friday, August 29, 2003 7:56 PM