Polycom EX Release Note
Release Notes
ViewStation EX/FX/VS4000, Version 6.0.5
ViewStation EX/FX/VS4000, Version 6.0.5
- 3 -
If both connections on port 24 are active and there is no room for another incoming
connection, then the ViewStation EX/FX/VS4000 system properly refuses this incoming
connection with a Port Disconnect message.
connection, then the ViewStation EX/FX/VS4000 system properly refuses this incoming
connection with a Port Disconnect message.
Corrected Issues
The following table lists issues corrected in version 6.0.5.
Feature
Limitation
Address Book
An Address Book file left over from the
ViewStation EX/FX/VS4000 release 4.2 did not use the
proper speed to call. This has been corrected.
ViewStation EX/FX/VS4000 release 4.2 did not use the
proper speed to call. This has been corrected.
The system address book has been updated to provide a
new ISDN phone number for the Polycom Austin location.
The 6.0.5 Softupdate package will automatically provide
the user with the new number after the upgrade is finished.
new ISDN phone number for the Polycom Austin location.
The 6.0.5 Softupdate package will automatically provide
the user with the new number after the upgrade is finished.
Camera
When the alternate PTZ camera was used for a snapshot,
it went back and forth to the home location before or after
the snapshot. This has been corrected.
it went back and forth to the home location before or after
the snapshot. This has been corrected.
Communication
If a user registered with a gatekeeper and made the
system an IP-only system by unplugging the network cable
between the ViewStation EX/FX/VS4000 system and PRI
module, the PRI icon and the gatekeeper icon on the main
screen alternately flashed yellow. This has been corrected
to show the PRI icon red and the gatekeeper icon green.
system an IP-only system by unplugging the network cable
between the ViewStation EX/FX/VS4000 system and PRI
module, the PRI icon and the gatekeeper icon on the main
screen alternately flashed yellow. This has been corrected
to show the PRI icon red and the gatekeeper icon green.
Internal MCU
When in a point-to-point call with VSX
™
systems at call
speeds of 384K or less and using the H.264 video protocol,
the ViewStation EX/FX/VS4000 system had trouble
negotiating video down to H.263 after adding another site
and becoming an MCU. This issue has been corrected.
the ViewStation EX/FX/VS4000 system had trouble
negotiating video down to H.263 after adding another site
and becoming an MCU. This issue has been corrected.
When a ViewStation EX/FX/VS4000 system was operating
as an MCU in a three-way or four-way mixed protocol
conference, if the user hung up one of the H.320 systems,
sometimes video would freeze at the other sites and not
recover unless an action occurred in the UI to force the
MCU to renegotiate caps with the other active sites. This
has been corrected.
as an MCU in a three-way or four-way mixed protocol
conference, if the user hung up one of the H.320 systems,
sometimes video would freeze at the other sites and not
recover unless an action occurred in the UI to force the
MCU to renegotiate caps with the other active sites. This
has been corrected.