ICOM ic-207h Instruction Manual

6

MEMORY OPERATION

30

■ Programming a memory channel

VFO mode settings, including the set mode contents such as
subaudible tone frequency, etc., can be programmed into a
memory channel.

➀

Set the desired frequency in VFO mode:

➥ Push [V/MHz] to select VFO mode.
➥ Set the frequency using the tuning dial.
➥ Set other data (e.g. tone frequency, etc.) if required.

➁

Push [S.MW] momentarily.

• “!” and the memory channel number flash.

➂

Rotate the tuning dial to select the memory channel to be

programmed.

• Memory channels not yet programmed are blank.

➃

Push [S.MW] for 1 sec. to program.

• 3 beeps may sound.
• Memory channel number automatically advances when continu-

ing to push [S.MW] after programming.

✔ CONVENIENT
Memory programming can be performed in versatile ways
e.g. memory channel to the same (or different) memory chan-
nel, memory channel to the call channel, etc.

[EXAMPLE]: Programming 145.870 MHz into memory channel 20 via the remote controller.

Push

and

Rotate

for setting
freq., etc.

Rotate

Push

momentarily

Push

for 1 sec. and continue pushing