ICOM ic-207h Instruction Manual

6

MEMORY OPERATION

31

■ Programming a memory channel via the microphone

Memory channel programming can be performed
via the microphone.

Ä

Push [BAND] to select the desired band, if necessary.

Å

Set the desired frequency in VFO mode:

➥ Push [VFO] to select VFO mode.
➥ Set the frequency using the keypad.
➥ Set other data (e.g. offset frequency, duplex direction, subaudi-

ble tone encoder ON/OFF and its frequency), if required.

Ç

Push [FUNC] then [EMW] momentarily.

É

Select the memory channel to be programmed:

➥ Push [Y] or [Z] to select the memory channel (direct numeral

input cannot be used).

Ñ

Push [FUNC] then [EMW] for 1 sec. to program.

➥ 3 beeps may sound and the VFO contents (including the sub-

audible tone frequency, etc.) are programmed.

➥ Memory channel number advances when continuing to push

[MW] after programming.

[EXAMPLE]: Programming 145.870 MHz into memory channel 20 via the microphone.

Push

,

Push

then

momentarily

Push

Push

for 1 sec. and
              continue pushing

then

MW