ICOM ic-207h Instruction Manual

6

MEMORY OPERATION

32

■ Transferring memory

This function transfers a memory channel’s contents into a
VFO (or another memory/call channel). This is useful when
searching for signals around a memory channel frequency
and for recalling the offset frequency, subaudible tone fre-
quency, etc.

➀

Push [BAND] one or more times to select a band.

➁

Select the memory channel to be transferred:

➥ Select memory mode by pushing [M/CALL] once or twice (“!”

appears).

➥ Rotate the tuning dial to select the memory channel.

➂

Push [S.MW] momentarily, then rotate the tuning dial to se-
lect another memory channel to transfer.

• To transfer to the VFO, push and hold [

(S.MW)

MW] instead of

pushing momentarily.

➃

Push and hold [

(S.MW)

MW] to transfer when a momentary

push was used in the previous step.

Push

+

for 1 sec.

Ä

Push [BAND] to select the desired band, if nec-
essary.

Å

Select the memory channel to be transferred:

➥ Push [MR] to select memory mode.
➥ Push [Y] or [Z] to select the memory channel; or

push [GENT] then push the desired memory chan-
nel number (2 digits) to select the memory chan-
nel directly.

Ç

Push [FUNC] then [EMW] momentarily, then
push [Y] or [Z] to select another memory
channel to transfer.

• To transfer to the VFO, push [FUNC] then push and

hold [EMW] instead of pushing momentarily.

É

Push [FUNC] then [EMW] for 1 sec. to transfer
when a momentary push was used in the previ-
ous step.

MW