Gateway fx6800 Reference Guide
www.gateway.com
63
Replacing the power supply
To replace the power supply:
1
Remove the side panel by following the instructions in
.
2
Disconnect the power supply cables from all
components (such as hard drives, CD or DVD drives, and
the system board), noting their locations and
orientation. (You will reconnect the cables after you
install the new power supply.)
components (such as hard drives, CD or DVD drives, and
the system board), noting their locations and
orientation. (You will reconnect the cables after you
install the new power supply.)
3
Remove the three screws that secure the power supply
to the computer.
to the computer.
4
Slide the power supply away from the back of the
computer, then lift up.
computer, then lift up.
5
Install the new power supply into the case, then install
the three screws to secure the power supply to the case.
the three screws to secure the power supply to the case.
6
Reconnect the power supply cables using your notes
from
from
7
Replace the side panel by following the instructions in
.
Tools
You need a Phillips screwdriver to replace the power supply.
Screws
8511858.book Page 63 Monday, December 18, 2006 10:51 AM