Canon imagePRESS C10000VP/C8000VP Manual

Power source

WARNING

• Put the power plug directly into a wall socket that has the same configuration as the plug.

The use of an adapter leads can result in an inadequate power supply. If a proper wall outlet
is not available, ask a qualified electrician to carry out the installation.

• Do not use a multiple outlet adapter or an extension lead. Contact your authorised service

representative if an extension lead is required. The use of an extension cord may result in fire
or electrical shock.

IMPORTANT

• Do not connect the machine to a mains voltage that differs from the value as stated on the

power marking label.

Power plug

WARNING

• For machines that are connected via a wall socket: Place the machine close to a wall socket

that is easily accessible. The power plug is intended to serve as a disconnect device.

Grounding

WARNING

• Connect the power cord to an electrical outlet (wall socket) that is equipped with a

grounding terminal.

• This equipment has not been designed for connection to an IT power system. An IT power

system is a voltage network in which the neutral wire is not connected to earth.

Installation

WARNING

• It is recommended to connect only copy-control products (or other products) which meet the

(inter)national product safety and radio frequency interference standards. Only use an
attachment cable as specified by the manufacturer.

• Make sure that the machine is placed on a level, horizontal surface of sufficient strength.
• Do not place this machine on an unstable or tilted surface.
• Do not place this machine in a location that is subject to lots of vibrations and shocks.
• Do not use flammable sprays, liquids or gases near this product, because this could cause a

fire.

Ventilation

IMPORTANT

• Do not block the ventilation openings of the machine.
• Be sure to allow a clearance of 60 mm or more at the back of this machine for the ventilation

duct.

Safety information (all countries)

Chapter 1 - Safety information