Canon imagePRESS C10000VP/C8000VP Manual
Actions in response to troubles
WARNING
• When a piece of metal, water or any other similar foreign matter gets inside the machine,
immediately turn OFF the power switch and unplug the power cord from the power outlet.
Then call your authorised service representative.
Then call your authorised service representative.
• Immediately stop using the machine if the machine becomes excessively hot, emits smoke,
or produces unusual odours or noises. Immediately turn OFF the power switch and unplug
the power cord from the power outlet. Then call your authorised service representative.
the power cord from the power outlet. Then call your authorised service representative.
• Stop using the machine if the machine was dropped or a cover was damaged. Immediately
turn OFF the power switch and unplug the power cord from the power outlet. Then call your
authorised service representative.
authorised service representative.
CAUTION
• LCD display. Do not rub, press or touch the display surface with hard material, because the
polariser at the surface can be easily scratched. The LCD module consists of glass. Therefore,
the LCD module can damage when you drop, pinch strongly or punch the module. When
glass breaks, be careful that you do not get injured by glass pieces. Call Customer Service.
the LCD module can damage when you drop, pinch strongly or punch the module. When
glass breaks, be careful that you do not get injured by glass pieces. Call Customer Service.
Moving the machine
WARNING
• Make sure that you disconnect the power cord and other cables before you move the
machine.
• Make sure that you check the documentation for the correct machine location before you
move the machine.
• Make sure that whenever the machine is moved, this is done by properly qualified people
who have received adequate instructions.
General use
WARNING
• Do not lean, lie or stand on any part of the machine, including any unit that can be pulled
outward (e.g. paper drawers).
• Do not touch or ingest fluids from a broken LCD; Liquid Crystal Display. When clothes or skin
come into contact with the fluid, immediately clean the clothes and skin with soap or
alcohol. After eye contact, immediately wash the eyes with a washing lotion for at least 15
minutes and consult a physician.
alcohol. After eye contact, immediately wash the eyes with a washing lotion for at least 15
minutes and consult a physician.
IMPORTANT
• Unplug the product when you will not use the product for a long period of time.
Safety information (all countries)
Chapter 1 - Safety information
9