Canon imageCLASS MF7470 Manual

4-32

All of the originals to be sent are first scanned and read into 
memory, then sent. This means that you do not need to stay near 
the machine once the originals have been scanned.

The machine sends each page of the document to the destination 
as it is scanned.
Although Direct Sending is slower than Memory Sending, you can 
use Direct Sending when you need to send an urgent document 
ahead of other documents stored in memory.

The memory can hold a total of approximately 1,000 pages for sent and 
received documents.
If the memory becomes full, delete unwanted received documents using 
the System Monitor screen. (See “Erasing Received Fax Documents,” on 
p. 4-79, or “Erasing Received I-Fax Documents,” on p. 4-83.)
With Direct Sending, you can send a document of two or more pages 
only when using the feeder. You can only send one page at a time when 
you place your original on the platen glass.
You can specify only one destination at a time for Direct Sending.
Memory Sending is automatically set when using Delayed Send or when 
multiple destinations are specified.
If an error occurs or you cancel transmission in the Direct Sending mode, 
you can check how many pages have been sent to the destination by 
printing the Activity Report, or on the Log screen for Fax on the System 
Monitor screen.

●

●

–

–

–

–
–

–

For more information on specifying the destination, see “Specifying 
Destinations,” on p. 4-21.

For instructions on specifying the scan settings, see “Scan Settings,” 
on p. 4-13.

If you specify the destination using 

–

 (numeric keys) or New 

Address tab, press [Direct] on the same screen.

To cancel Direct sending mode, press [Direct] again.
For instructions on setting the Stamp mode, see “Stamping 
Originals,” on p. 4-36.
For instructions on setting the Delayed Send mode, see “Delaying 
a Send Job” on p. 4-35.

–
–

–