Canon Océ VarioPrint 6000+ Series Manual

•  Adjust the position, number and type of the separators to optimize cover separation.

•  By default, 3 separators 9403785 are installed. To improve the cover picking and avoid miss

feed, adjust the position of the separators more to the RH side (close to the registration guide).

5.3.3  Blower nozzle position:
Adjust the height of the part (S) to adjust the position of the blower nozzle according to the

cover paper pile.

By default, the part (S) is adjusted as illustrated.

Adjust the height of the part (S) to optimise the

cover separation.

•   Move up the part (S) to increase the distance

between the separators and the covers in order

to get a cover separation more efficient for the

heavy covers.

•   Move down the part (S) to decrease the

distance between the separators and the

covers if many covers are picked up in the

same time or if light covers are used.

Page 77

9404146

9403785

Rigid

separator

Flexible

separator

Cover separators

Registration guide

 
 

The edge of the part (S) is aligned

with the bottom face of the bracket (B).