Olympus PEN-F Introduction Manual
139
EN
Connecting the camera to a computer and a printer
6
Direct printing (PictBridge)
By connecting the camera to a PictBridge-compatible printer with the USB cable, you
can print out recorded pictures directly.
can print out recorded pictures directly.
1
Connect the camera to the printer using the supplied USB cable and turn
the camera on.
the camera on.
Multi-connector
Smaller terminal
USB cable
Look for this
mark.
mark.
USB port
• Use a fully charged battery for printing.
• When the camera is turned on, a dialog should be displayed in the monitor prompting
• When the camera is turned on, a dialog should be displayed in the monitor prompting
you to choose a host. If it is not, select [Auto] for [USB Mode] (P. 108 ) in the camera
custom menus.
custom menus.
2
Use
FG to select [Print].
• [One Moment] will be displayed, followed by a print-
mode selection dialog.
• If the screen is not displayed after a few minutes,
disconnect the USB cable and start again from Step 1.
USB
MTP
Storage
Print
Set
Exit
Proceed to “Custom printing” (P. 140) .
• 3D photos, RAW images, and movies cannot be printed.
Easy printing
Use the camera to display the picture you wish to print before connecting the printer
via the USB cable.
via the USB cable.
1
Use
HI to display the pictures you want to print
on the camera.
2
Press
I.
• The picture selection screen appears when printing is
completed. To print another picture, use
HI to select
the image and press
Q.
• To exit, unplug the USB cable from the camera while the
picture selection screen is displayed.
PC/Custom Print
Easy Print Start