Netgear M4300-8X8F (XSM4316S) - Stackable Managed Switch with 16x10G including 8x10GBASE-T and 8xSFP+ Layer 3 User Manual
Manage Device Security
584
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Note:
The steps in this procedure describe creating an ACL based on the
destination MAC address. If you select a different ACL type, for
example, ACL based on a source IPv4, then what is shown on this
page varies, depending on the current step in the rule configuration
process.
destination MAC address. If you select a different ACL type, for
example, ACL based on a source IPv4, then what is shown on this
page varies, depending on the current step in the rule configuration
process.
6.
Use ACL Type to specify the ACL type you are using to create the ACL.
You can select one type from 10 optional types:
•
ACL Based on Destination MAC
. To create an ACL based on the destination MAC
address, destination MAC mask, and VLAN.
•
ACL Based on Source MAC
. To create an ACL based on the source MAC address,
source MAC mask, and VLAN.
•
ACL Based on Destination IPv4
. To create an ACL based on the destination IPv4
address and IPv4 address mask.
•
ACL Based on Source IPv4
. To create an ACL based on the source IPv4 address
and IPv4 address mask.
•
ACL Based on Destination IPv6
. To create an ACL based on the destination IPv6
prefix and IPv6 prefix length.
•
ACL Based on Source IPv6.
To create an ACL based on the source IPv6 prefix and
IPv6 prefix length.
•
ACL Based on Destination IPv4 L4 Port
. To create an ACL based on the
destination IPv4 Layer 4 port number.