Netgear M4300-8X8F (XSM4316S) - Stackable Managed Switch with 16x10G including 8x10GBASE-T and 8xSFP+ Layer 3 User Manual
Manage Device Security
585
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
•
ACL Based on Source IPv4 L4 Port
. To create an ACL based on the source IPv4
Layer 4 port number.
•
ACL Based on Destination IPv6 L4 Port
. To create an ACL based on the
destination IPv6 Layer 4 port number.
•
ACL Based on Source IPv6 L4 Port
. To create an ACL based on the source IPv6
Layer 4 port number.
Note:
For L4 port options, two rules are created: one for TCP and one for UDP.
7.
From the Direction menu, select Inbound or Outbound.
Traffic rule applies either to inbound traffic only or to outbound traffic only.
8.
From the Unit 1 and LAG switch figures onscreen, select the ports and LAGs to which the
rule must apply.
If a port or LAG is not selected, click the port or LAG to select it. If a port or LAG is
selected, click the port or LAG to clear it again.
selected, click the port or LAG to clear it again.
9.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Configure an ACL Based on Destination MAC Address
Note:
Binding ACLs to an interface fails if the system has no resources to
bind a new ACL.
bind a new ACL.
To configure a rule based on destination MAC address:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Security > ACL > ACL Wizard.