Netgear M4300-8X8F (XSM4316S) - Stackable Managed Switch with 16x10G including 8x10GBASE-T and 8xSFP+ Layer 3 User Manual

Use Rule ID to enter a whole number in the range of 1 to 1023 that is used to identify the 

rule. 

Use Action to specify what action is taken if a packet matches the rule's criteria. The 

choices are Permit or Deny. 

In the Match Every list, select either True or False:

True signifies that all packets must match the selected ACL and rule and are either 
permitted or denied. In this case, since all packets match the rule, the option of 
configuring other match criteria is not offered. 

To configure specific match criteria for the rule, remove the rule and re-create it, or 
re-configure Match Every to False for the other match criteria to be visible.

Use Destination MAC to specify the destination MAC address to compare against an 

Ethernet frame. 

Valid format is xx:xx:xx:xx:xx:xx. The BPDU keyword can be specified using a destination 
MAC address of 01:80:C2:xx:xx:xx. 

Use Destination MAC Mask to specify the destination MAC address mask specifying which 

bits in the destination MAC to compare against an Ethernet frame. 

The valid format is xx:xx:xx:xx:xx:xx. The BPDU keyword can be specified using a 
destination MAC mask of 00:00:00:ff:ff:ff. 

Specify the VLAN ID to compare against an Ethernet frame. 

Valid range of values is 1 to 4093. Either a VLAN range or VLAN can be configured.

From the Direction menu, select Inbound or Outbound.