Netgear FVS318Gv2 – ProSAFE VPN Firewall Series Reference Manual
IPv4 and IPv6 Internet and Broadband Settings
42
NETGEAR ProSAFE VPN Firewall FVS318G v2
8.
To verify the connection, click the Status option arrow in the upper right of the screen.
The Connection Status screen shows a valid IP address and gateway, and you are
connected to the Internet. If the configuration was not successful, see
connected to the Internet. If the configuration was not successful, see
Configure a Static IPv6 Internet Connection
To configure a static IPv6 or PPPoE IPv6 Internet connection, you must enter the IPv6
address information that you received from your ISP.
address information that you received from your ISP.
To configure static IPv6 broadband ISP settings:
1.
Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
login time-out, you are automatically logged out.
2.
Select Network Configuration > WAN Settings > Broadband ISP Settings.
The Broadband ISP Settings screen displays.