Netgear FVS318Gv2 – ProSAFE VPN Firewall Series Reference Manual

To verify the connection, click the Status option arrow in the upper right of the screen.

The Connection Status screen shows a valid IP address and gateway, and you are 
connected to the Internet. If the configuration was not successful, see 

on page 389.

For more information about the Connection Status screen, see 

on page 373.

If your ISP requires MAC authentication and another MAC address was previously 
registered with your ISP, you must enter that address on the Broadband Advanced 
Options screen for the corresponding WAN interface (see 

on page 52).

To configure a PPPoE IPv6 Internet connection, you must enter the PPPoE IPv6 information 
that you received from your ISP. 



Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.

The NETGEAR Configuration Manager Login screen displays. 

b.  In the Username field, enter admin and in the Password / Passcode field, enter 

password.

Use lowercase letters. If you changed the password, enter your personalized 
password. Leave the domain as it is (geardomain).

c.  Click the Login button.

The Router Status screen displays. After five minutes of inactivity, which is the default 
login time-out, you are automatically logged out.

Select Network Configuration > WAN Settings > Broadband ISP Settings.

The Broadband ISP Settings screen displays.