Netgear WAC104 – Dual Band 802.11ac Wireless Access Point User Manual

Wired Equivalent Privacy (WEP) security is a legacy authentication and data encryption mode that is

superseded by WPA-PSK and WPA2-PSK. WEP limits the WiFi transmission speed to 54 Mbps (the access

point is capable of speeds of up 300 Mbps in the 2.4 GHz band).

If you want to change the WiFi settings of the access point’s network, use a wired

connection to avoid being disconnected when the new WiFi settings take effect.

Open a web browser from a computer that is connected to the same network as the access point or to

the access point directly through an Ethernet cable or WiFi connection.

Enter the IP address that is assigned to the access point.
If you did not enable the DHCP client on the access point or did not assign a static IP address, enter

the default access point IP address 

192.168.0.100.

A login window opens.

Enter the access point user name and password.
The user name is 

admin. The default password is password. The user name and password are

case-sensitive.
The Home page displays.

Select

Setup > Wireless Setup.

The Wireless Network page displays.

In the Wireless Network (2.4GHz b/g/n) section, from the 

Mode menu, select Up to 54 Mbps.

The page adjusts to display the 

WEP radio button.