Netgear M4100-26G (GSM7224v2h2) - 22‐port GE + 4 GE Combo L2 Managed Switch Software Guide

This command adds to the specified class definition a match condition based on the value of 
the layer 2 VLAN Identifier field (the 802.1Q tag of a VLAN tagged packet). The VLAN is an 
integer from 0 to 4095. 

Class-Map Config

Ipv6-Class-Map Config

This command adds to the specified class definition a match condition based on the value of 
the layer 2 secondary VLAN Identifier field (the 802.1Q tag of a double VLAN tagged packet). 
The VLAN is an integer from 0 to 4095. 

Class-Map Config

Ipv6-Class-Map Config

Use the DiffServ policy commands to specify traffic conditioning actions, such as policing and 
marking, to apply to traffic classes

Use the policy commands to associate a traffic class that you define by using the class 
command set with one or more QoS policy attributes. Assign the class/policy association to 
an interface to form a service. Specify the policy name when you create the policy.

Each traffic class defines a particular treatment for packets that match the class definition. 
You can associate multiple traffic classes with a single policy. When a packet satisfies the 
conditions of more than one class, preference is based on the order in which you add the 
classes to the policy. The first class you add has the highest precedence.

This set of commands consists of policy creation/deletion, class addition/removal, and 
individual policy attributes. 

Default

none

Format

match srcl4port {<portkey> | <0-65535>}

Mode

Class-Map Config

Ipv6-Class-Map Config

Default

none

Format

match vlan <0-4095>

Mode

Default

none

Format

match secondary-vlan <0-4095>

Mode