Netgear M4100-26G (GSM7224v2h2) - 22‐port GE + 4 GE Combo L2 Managed Switch Software Guide
Quality of Service Commands
282
M4100 Series ProSAFE
Managed
Switches
redirect
This command specifies that all incoming packets for the associated traffic stream are
redirected to a specific egress interface (physical port or port-channel).
redirected to a specific egress interface (physical port or port-channel).
conform-color
Use this command to enable color-aware traffic policing and define the conform-color class
map. Used with the police command where the fields for the conform level are specified. The
<class-map-name>
map. Used with the police command where the fields for the conform level are specified. The
<class-map-name>
parameter is the name of an existing DiffServ class map.
Note:
This command might only be used after specifying a police command
for the policy-class instance.
for the policy-class instance.
class
This command creates an instance of a class definition within the specified policy for defining
treatment of the traffic class through subsequent policy attribute statements. The
<classname>
treatment of the traffic class through subsequent policy attribute statements. The
<classname>
is the name of an existing DiffServ class.
Note:
This command causes the specified policy to create a reference to the
class definition.
class definition.
Note:
The CLI mode is changed to Policy-Class-Map Config when this
command is successfully executed.
command is successfully executed.
Format
redirect <slot/port>
Mode
Policy-Class-Map Config
Incompatibilities
Drop, Mirror
Format
conform-color <class-map-name>
Mode
Policy-Class-Map Config
Format
class <classname>
Mode
Policy-Map Config