Netgear M4100-26G (GSM7224v2h2) - 22‐port GE + 4 GE Combo L2 Managed Switch Software Guide
Quality of Service Commands
281
M4100 Series ProSAFE
Managed
Switches
Note:
The only way to remove an individual policy attribute from a class
instance within a policy is to remove the class instance and re-add it
to the policy. The values associated with an existing policy attribute
can be changed without removing the class instance.
instance within a policy is to remove the class instance and re-add it
to the policy. The values associated with an existing policy attribute
can be changed without removing the class instance.
The CLI command root is policy-map.
assign-queue
This command modifies the queue id to which the associated traffic stream is assigned. The
<queueid>
<queueid>
is an integer from 0 to n-1, where n is the number of egress queues supported
by the device.
drop
This command specifies that all packets for the associated traffic stream are to be dropped at
ingress.
ingress.
mirror
This command specifies that all incoming packets for the associated traffic stream are copied
to a specific egress interface (physical port or LAG).
to a specific egress interface (physical port or LAG).
Format
assign-queue <queueid>
Mode
Policy-Class-Map Config
Incompatibilities
Drop
Format
drop
Mode
Policy-Class-Map Config
Incompatibilities
Assign Queue, Mark (all forms), Mirror, Police, Redirect
Format
mirror <slot/port>
Mode
Policy-Class-Map Config
Incompatibilities
Drop, Redirect