Netgear AirCard 598U (all others) Installation Guide

Page of 52
Rev 2  Feb.11
35
When the modem is locked, you cannot:
Make data connections (the 
Connect
 button is unavailable).
Power off the modem.
Use GPS or SMS.
Run the Activation Assistant.
Locking the modem
Note: If you forget the lock code, you will not be able to use the modem until you receive 
assistance from your service provider.
To lock the modem:
1.
End any active connection. (You can lock the modem only when it is discon-
nected; 
.)
2.
From the 
Extras
 item on the Watcher menu, choose 
Lock ... Device
.
3.
In the Watcher window, enter the lock code (PIN), and click 
Ok
.
When the modem is locked, Watcher displays “Device is Locked.” The 
Connect
 
button is unavailable.
Unlocking the modem
When the modem is locked, Watcher displays “Device is Locked.”
To unlock the modem:
1.
From the 
Extras
 item on the Watcher menu, choose 
Unlock ... Device
.
2.
In the Watcher window, enter the lock code (PIN), and click 
Ok
.
If you can’t recall your lock code, try using the last four digits of your modem’s 
phone number. If this doesn’t work, call your service provider.
When the modem is unlocked, Watcher no longer displays “Device is Locked.”
Powering the modem off
If you are using your modem in an aircraft, hospital, or other environment where 
the modem may cause interference, you can power the modem off (without 
removing it from your USB slot), and still use other functions of your computer.
This also allows you to conserve your notebook computer’s battery.
To power the modem off:
1.
If the modem is locked, 
2.
Close any active data connection (in Watcher, click 
Disconnect
).
3.
From the 
Extras
 item on the Watcher menu, select 
Turn ... Device Off
.
When the modem is powered off, Watcher displays “Device is powered OFF;” 
most of the Watcher and modem features are not available.