Netgear C3700 – N600 WiFi Cable Modem Router User Manual

Page of 101
Specify Internet Port Settings 
90
N600 WiFi Cable Modem Router Model C3700 
8. 
In the Service User list, select Any, or select Single address and enter the IP address of 
one computer:
Any (the default) allows any computer on the Internet to use this service. 
Single address restricts the service to a particular computer. 
9. 
Select the service type, either TCP or UDP or TCP/UDP (both). 
If you are not sure, select TCP/UDP.
10. 
In the Triggering Port field, enter the number of the outbound traffic port that will open the 
inbound ports. 
11. 
Enter the inbound connection port information in the Connection TypeStarting Port, and 
Ending Port fields.
12. 
Click the Apply button.
The service is now in the Portmap table. You must enable port triggering before the 
modem router uses port triggering for the service that you added. For information about 
port triggering, see 
Specify When to Use Port Triggering
To specify when to use port triggering: 
1. 
Launch a web browser from a computer or wireless device that is connected to the 
network.
2. 
Type http://routerlogin.net or http://192.168.0.1.
A login screen displays.
3. 
Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4. 
Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
downloadlike
ArtboardArtboardArtboard