Xerox Paris, a document system Support & Software User Guide
Designing your first Environment
The Paris Designer User Manual
61
S
E T T I N G T H E G R I D L I N E S P A C I N G
Before you create text blocks from the data file, you will find it helpful if the grid
line spacing matches the font line spacing set in the text block.
line spacing matches the font line spacing set in the text block.
To set the grid line spacing:
1.
Click on the Settings button to display the System Settings dialogue and the
current settings for the grid line spacing.
current settings for the grid line spacing.
2.
To adjust the grid settings to match the font, display the Vertical drop-down
list of measurements and choose the required unit of measure from the list.
list of measurements and choose the required unit of measure from the list.
3.
Type the required value in the Vertical fields (in this case ‘Per Inch’ and ‘6’),
then choose OK to return to the Environment Editor.
then choose OK to return to the Environment Editor.
NOTE:
1. The default setting for Autosave is ‘Active’ and ‘Save every 5 minutes’. These
settings can be changed if required.
settings can be changed if required.
2. Choosing ‘OK’ will retain system settings for this editing session only.
Choosing ‘OK and Save’ will make them permanent default settings until reset
again and the ‘OK and Save’ option is chosen.
Choosing ‘OK and Save’ will make them permanent default settings until reset
again and the ‘OK and Save’ option is chosen.