Xerox Phaser 8400 User Guide

To print the “Startup Page”:

Select 

, then press the OK button.

Select 

, then press the OK button.

Select 

, then press the OK button to print.

To save energy, the printer enters a Power Saver, low-energy consumption mode after a pre-
defined period of time since its last activity. In this mode, most printer electrical systems are 
shut down. When a print job is sent to the printer, the printer enters Warmup Mode. You can 
also warm up the printer by pressing the OK button on the front panel.

If you find that the printer is going into Power Saver mode too often and you do not want to 
wait while the printer warms up, increase the length of time before the printer goes into Power 
Saver mode. Change the timeout value as follows:

At the printer’s front panel, select 

, then press the OK button.

Select 

, then press the OK button.

Select 

, then press the OK button.

Press the Down Arrow or Up Arrow button to scroll to a selected Power Saver timeout 
value. Select a larger value if you want to extend the length of time before the printer goes 
into Power Saver mode.

Press the OK button.

Intelligent Ready mode is an automated system that:

■

Monitors the printer’s usage. 

■

Warms up the printer when you are most likely to need it based on past usage patterns. 

To turn on/off the Intelligent Ready mode, use either:

■

The printer’s front panel

■

CenterWare IS

To turn Intelligent Ready mode on/off:

Select 

, then press the OK button. 

Select 

, then press the OK button. 

Select

. 

Press the OK button to turn on/off 

.

Select 

, then press the OK button to return to the main menu.