Xerox Phaser 840 Document
106
Phaser 840 Color Printer
8
Connecting Scanners and Hard Drives
Enabling and disabling Sys/Start Job execution
You may load a startup (Sys/Start) file onto an external hard disk. The Sys/Start job
file is similar to an init file: When you turn on the printer, the file
executes — providing that Sys/Start has been enabled either through a front panel
setting or with a control file downloaded to the printer.
file is similar to an init file: When you turn on the printer, the file
executes — providing that Sys/Start has been enabled either through a front panel
setting or with a control file downloaded to the printer.
With multiple disks, only one disk can contain a Sys/Start file.
If the Sys/Start file contains an error, the printer ignores the remainder of the file and
may not start up as expected.
may not start up as expected.
Using the front panel
1.
When the
Ready to Print
message is displayed, use the down arrow
button to scroll to
Menu
; press the
Select
button.
2.
Scroll to
Printer Configuration
; press
Select
.
3.
Scroll to
Default Printer Settings
; press
Select
.
4.
Scroll to
Advanced Printer Settings
; press
Select
.
5.
Scroll to
Sys/Start Job
. Press
Select
to change the setting to
On
.
6.
Scroll to
Exit
; press
Select
to save the new setting. The
Ready to
Print
message appears.
Using a Macintosh utility file
1.
From the printer’s CD-ROM, run the Installer application. Select Custom
Install
Install
. Select Printer Utilities. From your computer’s hard disk, open
the PhaserTools folder. Open Printer Utilities.
2.
In the Chooser, select your printer.
3.
From the PhaserTools folder, double-click Apple Printer Utility. Download
one of these files to the printer:
one of these files to the printer:
■
Set SysStart Job
Enables automatic execution of the SysStart job.
■
No SysStart Job
Disables automatic execution of the SysStart job.