Xerox Phaser 840 Document
Advanced Features and Troubleshooting Manual
111
Connecting Scanners and Hard Drives
8
Configuring the printer driver
After the internal IDE hard drive installation is complete, the printer driver needs to
be configured before you can use your installed hard drive.
be configured before you can use your installed hard drive.
N
O
T
E
If the printer driver is not configured properly, some printer options will not be
recognized.
recognized.
Windows 95, Windows 98, Windows NT4
1.
From the Start menu, select Settings, then select Printers.
2.
Select your Tektronix printer driver. From the pop-up menu, choose
Properties
Properties
.
3.
Click the Device Options (Windows 95/Windows 98) or Device Settings
(Windows NT4) tab.
(Windows NT4) tab.
4.
Under Installable Options, select the options that are installed in your
printer (for example, memory configuration, High-Capacity Paper Tray
Assembly, or internal hard drive); this information can be found on the
Startup page. Setting up the driver allows you to select all printer options
when printing.
printer (for example, memory configuration, High-Capacity Paper Tray
Assembly, or internal hard drive); this information can be found on the
Startup page. Setting up the driver allows you to select all printer options
when printing.
5.
Click OK.
Macintosh
1.
From the Apple menu, select Chooser.
2.
Click the icon of the printer driver (LaserWriter 8) on the left side of the
window.
window.
3.
Click the Zone for your printer, if applicable.
4.
From the list of printers, select your printer. If it is not in the list, check the
hardware connections and verify that you have selected the correct zone in
the Chooser on the left side of the window.
hardware connections and verify that you have selected the correct zone in
the Chooser on the left side of the window.
5.
Click Setup/Create to select the correct PPD (PostScript Printer
Description) file.
Description) file.
6.
After the automatic setup has completed, click Setup and click Configure.
7.
Select the options that are installed in your printer (for example, memory
configuration, High-Capacity Paper Tray Assembly, or internal hard
drive); this information can be found on the Startup page. Setting up the
driver allows you to select all printer options when printing.
configuration, High-Capacity Paper Tray Assembly, or internal hard
drive); this information can be found on the Startup page. Setting up the
driver allows you to select all printer options when printing.
8.
Click OK.
9.
Close the Chooser.
N
O
T
E
Do not change the value for Available PostScript Memory Setting; this value is
automatically set.
automatically set.