Xerox Phaser 840 Document

The Print using pop-up menu lets you choose between printing an image or saving 
the image to disk.  It has two to four options, depending on your system 
configuration: 

■

Available if a TCP/IP stack is installed and running.  From Printer 

, choose a printer.  Add and delete printers in the list, and edit the 

printer configurations.

■

Available if you have local ports installed in your PC.  From the 

, choose the desired printer port.

■

Prints the image through the selected printer driver.  From 

, choose a printer.  

■

Saves an image to disk as a PostScript file.  Click Save; a 

dialog box lets you choose a new or existing file for saving the PostScript 
code.  

When selected, the File format pop-up menu becomes available.  This 
pop-up menu has two options: ASCII base-85 and Binary. 

■

  Image data is encoded using an ASCII base-85 filter 

during file output, making the resulting PostScript file portable so that 
it can be downloaded through interface ports that don’t support 
binary data.  Note that the file may be up to 25% larger.

■

  Image data is output in binary format.  Recommended for 

network printing only (not for the parallel port).

Displays the currently selected printer.

■

Lists all printers supported by PhaserPrint software. 

■

When you select your printer model, PhaserPrint displays the correct 
options for your printer.  

TCP/IP is the fastest printing method; it prints jobs in much less time than the 
Parallel Port or Printer Driver methods, and is the recommended method if it is 
available for the printer you are using.