Xerox Phaser 6000 User Guide

Troubleshooting

Phaser 6000/6010 Color Printer
User Guide

56

Use the following procedure to perform the automatic color registration adjustment.

Note: 

An automatic color registration adjustment is performed every time a new toner cartridge is 

installed.

1. On the printer control panel, press the Menu button.

2. Press the Down Arrow button to go to Admin Menu and then press the OK button.

3. Press the Down Arrow button to scroll to Maintenance Mode and press OK.

4. Press the Down Arrow button to scroll to Adjust Color Regi and press OK.

5. At Auto Adjust, press OK.

6. At the prompt, Are you sure?, press OK to begin the calibration. 

When the adjustment is complete, Ready appears on the printer control panel.

Manual Color Registration at the Phaser 6010 Printer

You can fine-tune color registration by performing a manual adjustment. Manual color registration 
adjustment is a three-step process:

1.

2.

3.

Note: 

The following procedure can also be performed using the Printer Setting Utility. For details, 

see 

1. On the printer control panel, press the Menu button.

2. Press the Down Arrow button to go to Admin Menu and then press the OK button.

3. Press the Down Arrow button to scroll to Maintenance Mode and press OK.

4. Press the Down Arrow button to scroll to Adjust Color Regi and press OK.

5. Press the Down Arrow button to scroll to Color Regi Chart and press OK.

The Color Registration Chart prints.

6. Continue to 

on page 56 to determine if an adjustment is 

necessary.

The Color Registration Chart shows horizontal and vertical values for each color. The color registration 
marks are grouped on the chart as follows:

Vertical registration values are at the top of the page:

•

Y = Paper feed direction yellow

•

M = Paper feed direction magenta

•

C = Paper feed direction cyan