Xerox XDPE/400 (also known as EOMS I-Services) Support & Software User Guide
Installing and Customizing XDPE/400 (9/2001)
4-9
Installation requirements
Supported printer/interface box configurations
XDPE/400 allows printing to three different device classes: local, remote
(via TCP/IP), and network (via TCP/IP and HPT). The printer/interface box
configurations supported for each type are listed in the following sections.
For more information about configuring your interface box for XDPE/400,
refer to appendix A, “
Local and remote printing
If you use XDPE/400 with either the local or remote device classes, you
must use a twinaxial-connected interface box to convert the print data
stream for the printer. XDPE/400 supports these twinax-to-Xerox printer
interface boxes:
•
•
3X Twinax Printstation
•
42XX INTERNAL
•
4450 INTERNAL
•
Agile 5250 OPTIMA
•
BARR
•
Flex i-data 5250 C/RS-Xerox
•
IBM AS/400 Client Access (PC Support)
•
MPI
•
Smart
•
Solimar
•
Spur/USAll
Table 4-6 shows supported configurations for local and remote printing.
I
Table 4-6.
Interface boxes for XDPE/400-supported printers
Modes
Printers
4235, 3700
4700, 4213,
4030 II
4450
4230, 4220,
4219, 4215,
*PCL
9790, 9700, 8790, 8700, 4890,
4850, 4635, 4135, 4090, 4050,
180 LPS, 92C LPS,
DP96,*LCDS
XPPM
Flex, Agile, Smart,
3X (4235 only)
None
INTERNAL
None
Spur/USAII, Solimar, BARR
XDPM
Flex, Agile, MPI,
PCSUPP,
3X (4235 only)
Flex, Agile,
MPI,
PCSUPP
None
None
None
PCL
None
None
None
PCSUPP,
INTERNAL
None