Xerox DocuTech 6100 Production Publisher User Guide

 
DT6180 HandyBook 

25  

holes to the left. 

    

Do not bind or run 2-sided prints. 

• Never-tear 

Do not bind or run 2-sided prints. 

•  3 hole drilled, edge reinforced, 4024 DP 

paper 

Do not stitch or bind. Do not run with tabs. Tabs 
can be inserted off-line. 

    

For optimum satisfaction, use the paper trays 1 
and 2 plate assembly. The plate assembly can be 
ordered by a Customer Service Representative. 

    

Up to 500 sheets can be placed in the tray. 

    

Load the paper into all trays with holes to the left, 
reinforced side down. 

    

Select Properties... on the Trays pull-down 
menu. On the Stock window, under Type, select 
Drilled. 

    

Image quality problems may occur near the 
reinforcement with side 2 printing. 

    

Remove the paper immediately before use to 
ensure that prints stay flat. 

    

Print with no more than 200 sheets in a tray. 

    

Select a quantity of 50 or fewer at a time. 

•  Transparencies with a 0.5 inch (13 mm) 

white stripe 

Load the stock with the white stripe to the right 
into trays 1 and 2. 

    

Load the shiny side up for optimum performance. 

• Removable 

stripe 

• Transparencies 

Do not load more than 50 removable-stripe 
transparencies into trays 1 and 2. 

    

With the white stripe to the right, place the 
transparencies on top of approximately 50 sheets 
of paper in the tray. 

    

Do not run as inserts to a bound job. Printing is 
not allowed on inserts. 

• Tabs 

Mylar tabs should be run out of tray 4. 

• Preprinted 

stock 

Preprinted forms must be made up of ink that has 
the following characteristics: 
• Can withstand temperatures up to 400°F 
(204°C) 
• Can withstand pressure of 140 psi at the 
above temperature 
• Can withstand the above conditions for 25 
Milliseconds 

• High 

speed 

•  transparencies with white 

• stripe 

Load the stock with the stripe to the right in trays 
1 and 2. 

• Label 

stock 

Load the stock face up into trays 1 and 2; face 
down into trays 3, 4, and 5. 

    

Do not select 2-sided prints. 

• Letterhead 

(preprinted) 

Load the paper into trays 3, 4, and 5; side 1 with 
the printed side down, top edge to the front of the 
tray.