Xerox DocuTech 6100 Production Publisher User Guide

 
DT6180 HandyBook 

26  

Load the paper into trays 1 and 2; side 1 up with 
the top edge to the front of the tray. 
Do not use freshly preprinted paper in trays 1 and 
2. 

• Textured 

paper 

Heavily textured paper may produce prints with a 
ragged character appearance or deletions. To 
test, run a proof print. 

• Window 

stock 

Run if the window is 2.2 to 4 inches (57 to 102 
mm) from the top edge of the paper and at least 1 
inch (25.4 mm) from each side of the paper. 

    

Run only as the first page or a front cover to 
avoid finisher bin jams. 

    

Load the window stock face-up into a tray (tray 1 
or 2 is recommended) with the top edge toward 
the front of the tray. 
If running plastic-covered window stock, there 
may be some distortion. To test, run a proof copy. 

• Xerox 

Carbonless 

Xerox Carbonless Paper is recommended.   

 
Do not use the following stocks: 
• Multipart forms 
• Stocks outside of the recommended size and weight ranges 

The specifications for stock fed to the Stitcher for reliable stapling are as follows:  

  

Metric 

Imperial 

Size:  

203 mm x 254 mm to 229 mm x 356 mm 

8 x 10 inches to 9 x 14.33 inches 

Weight: 

60 g/m² to 200 g/m² 

- Weights outside the above limits are not 

recommended. 

16 to 110 index / 53 bond or xerographic  

- Weights outside the above limits are not 

recommended. 

  

  

  

 
 
NOTE: For larger sizes, send to Top Tray as Unstapled.  
 
Set size limit due to copy paper weight:  

• 

Collated: Up to 65 sheets of 80 g/m² (20 lb), or 7 mm (0.28 inch) thick sets. Less reliable stapling 
may be expected from 66 to 70 sheets.  

• 

Uncollated: 50 sheets maximum per stitch, 7 mm (0.28 inch) thick sets. Minimum: 2 sheets. 

Type or condition: Xerographic bond paper in good condition, and drilled or hole-punched paper. The 
Stacker capacity adjusts automatically to suit various set sizes.