Xerox DocuTech 6100 Production Publisher User Guide
Replacing Consumables
DT6180 HandyBook
37
Replace the Toner (Dry Ink) Bottle
CAUTION: Do not use warm water or cleaning solvents to remove Toner from your skin or
clothing. This will set the Toner and make it difficult to remove. If Toner gets on your skin
or clothing, use a brush to remove the Toner, blow it off, or wash it off with cold water and
mild soap.
NOTE: There is an eight step diagram to the right of the Toner Bottle with instructions on how to
change the cartridge.
To remove the Toner (Dry Ink) Bottle:
1. Open the Processor Doors.
2. Place a drop cloth or a few sheets of paper on the floor under the Toner Bottle area to
2. Place a drop cloth or a few sheets of paper on the floor under the Toner Bottle area to
catch any Toner that may spill on the flooring.
3. Pull the empty Toner Bottle out of the machine until it stops.
4. Rotate the green handle up, to the unlatched position.
5. Remove the bottle from the receptacle.
NOTE: You may want to put the used Toner Bottle in the box that the new cartridge came
in. Empty Toner Bottles are not returned to Xerox and can be disposed of according to
your local recycling regulations.
To replace the Toner Bottle:
6. Remove the new Toner Bottle from the box. Make sure you do not remove the protective