Xerox DocuTech 6100 Production Publisher User Guide
Replacing Consumables
DT6180 HandyBook
39
CAUTION: To prevent a Toner spill, do not tip or tilt the waste container.
5. Remove the cap from the top of the full Toner Waste Container.
6. Place the cap over the opening on the end of the full Toner Waste Container.
7. Remove the new Toner Waste Container from the box.
8. Slide the new Toner Waste Container all the way into the machine until the container
8. Slide the new Toner Waste Container all the way into the machine until the container
stops.
NOTE: You do not need to remove the cap from the storage position at this time.
NOTE: You do not need to remove the cap from the storage position at this time.
9. Close the Processor Doors.
CAUTION: Do not use warm water or cleaning solvents to remove Toner from your skin or
clothing. This will set the Toner and make it difficult to remove. If any Toner gets on your
skin or clothing, use a brush to remove the Toner, blow it off, or wash it off with cold water
and mild soap.
NOTE: Old waste containers should not be emptied, cleaned and used again. There is a sensor
inside the container that remains dirty and the machine will not recognize the container. Save the
full waste container and give it to the service technician on the next visit. The technician will
dispose of it properly. This material is not a hazardous waste.
clothing. This will set the Toner and make it difficult to remove. If any Toner gets on your
skin or clothing, use a brush to remove the Toner, blow it off, or wash it off with cold water
and mild soap.
NOTE: Old waste containers should not be emptied, cleaned and used again. There is a sensor
inside the container that remains dirty and the machine will not recognize the container. Save the
full waste container and give it to the service technician on the next visit. The technician will
dispose of it properly. This material is not a hazardous waste.