Xerox ColorQube 9201/9202/9203 Administrator's Guide
Device Connection and Quick Setup
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
17
5.
Click on the [Connectivity] link, then click on the [Protocols] link.
Note:
To see IPv6 addressing parameters, if desired, click IP (Internet Protocol) in the list of
Protocols, then click on IP (v6).
6.
Select your individual protocol of interest from the displayed list and modify settings to your
requirements, for further information refer to
requirements, for further information refer to
Set a Description for the Device
The Internet Services Properties Description page contains information that identifies a specific device
model, name and physical location.
model, name and physical location.
1.
At your Workstation, open the web browser and enter the IP address of the device in the Address
bar, and press [Enter].
bar, and press [Enter].
2.
Click on the [Properties] tab.
3.
If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4.
Click on the [Login] button.
5.
Select [Description] in the directory tree.
6.
In the Identification area:
a.
Type a name of your choice for the device in [Device Name].
b.
Type the site location for the device in [Location].
c.
Click on the [Apply] button to accept the changes or [Undo] to return the settings to their
previous values.
previous values.
To Enable Services
Services are pre-installed on the device, and must be enabled using the Service Registration screen in
on Internet Service.
on Internet Service.
1.
At your Workstation, open the web browser and enter the IP address of the device in the Address
bar, and press [Enter].
bar, and press [Enter].
2.
Click on the [Properties] tab.
3.
If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4.
Click on the [Login] button.
5.
Click on the [Services] link.
6.
Select [Service Registration] in the directory tree.
7.
In the Service Registration area:
a.
Either click on the [Enable All] button to ensure all the listed services are enabled, or check
the required services checkbox you want to be displayed on the device’s touch screen.
the required services checkbox you want to be displayed on the device’s touch screen.
b.
Click on the [Apply] button.
To View the Service Status at the Device
To view the service status at the device.