Xerox ColorQube 9201/9202/9203 Administrator's Guide
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
19
3
General Setup
Administrator Tools Password
The Administrator password is required to access the administrator tools function both from the device
touch screen and Internet Services. Access to the administrator tools is necessary to configure the
device, network connectivity and optional settings.
touch screen and Internet Services. Access to the administrator tools is necessary to configure the
device, network connectivity and optional settings.
Note:
Note that the web user interface (Internet Services) is now protected by the Administrator
password, so that you will need to log in with the User ID and Password, the default is admin and
1111. BEFORE modifying any settings. After working with settings, make sure to log out by clicking
on [admin-Logout] in the upper right corner of the Internet Services screen, then click on the
[Logout] button.
1111. BEFORE modifying any settings. After working with settings, make sure to log out by clicking
on [admin-Logout] in the upper right corner of the Internet Services screen, then click on the
[Logout] button.
We recommend that you change the Administrator password immediately after device installation. A
password of at least 9 characters in length should be sufficient for a year. Once changed, ensure the
password is kept in a secure place for future use.
password of at least 9 characters in length should be sufficient for a year. Once changed, ensure the
password is kept in a secure place for future use.
New Administrator Password
1.
At your Workstation, open the web browser and enter the IP address of the device in the Address
bar, and press [Enter].
bar, and press [Enter].
2.
Click on the [Properties] tab.
3.
If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4.
Click on the [Login] button.
5.
Click on the [Security] link.
6.
Select [Admin Password] in the directory tree.
7.
Ensure New Password tab is highlighted on the top of the screen.
8.
Enter detail in the [New Password] and [Retype New Password] fields.
9.
Click on the [Apply] button.
Note:
The user name “admin” is reserved for the Device System Administrator Account.
Do NOT use the username “admin” for any local or network accounts on the device.