Xerox ColorQube 9201/9202/9203 Administrator's Guide
Server Fax
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
261
4.
Click on the [Login] button.
5.
Click on the [Services] link.
6.
Click on the [Server Fax] link.
7.
Select [Fax Repository Setup] in the directory tree.
8.
In the Settings area:
a.
Select FTP from the [Protocol] drop-down menu.
b.
Select either [IPv4 Address], [IPv6 Address] or [Host Name].
c.
Enter the IP Address and Port or Host Name and Port of the Repository Server.
d.
Type in the path to the location of the repository server in [Document Path]. For example:
/(directory name)/(directory name).
/(directory name)/(directory name).
e.
In the [Login Credentials to Access the Destination] area, select one of the following:
•
Authenticated User and Domain: Select this method to be used in conjunction with the
network accounting or another authentication method, such as Secure Access, to
validate the user.
network accounting or another authentication method, such as Secure Access, to
validate the user.
•
Authenticated User: When selected, the device will prompt to log in using your own
network credentials.
network credentials.
•
System: Selecting this method allows the device to authenticate to the server with the
credentials entered in the [Login Name] and [Password] entry fields.
credentials entered in the [Login Name] and [Password] entry fields.
f.
Check the [Select to save new password] checkbox, if you want to change the password for
an existing Login Name.
an existing Login Name.
9.
Click on the [Apply] button to accept the changes.
10. Configure the Defaults settings, refer to
Configure a Fax Repository using NetWare
Information Checklist
Before starting the procedure, please ensure the following items are available or have been performed.
•
Ensure the device is fully functioning on the network prior to installation.
•
Create a new directory on the NetWare server to be used as the fax repository. Note down the
server name, server volume, directory path, NDS Context and Tree, if applicable.
server name, server volume, directory path, NDS Context and Tree, if applicable.
•
Create a user account and password with access to the fax repository. When a document is faxed,
the machine logs in using the account, transfers the file to the server and then logs out.
the machine logs in using the account, transfers the file to the server and then logs out.
•
Ensure the NetWare protocol is enabled on your machine.
Print a Configuration Report to verify that the NetWare protocol is enabled on your machine.
1.
Press the <Machine Status> button.
2.
Touch the [Machine Information] tab.
3.
Touch [Information Pages].
4.
Touch [Configuration Report].
5.
Touch [Print], then touch [Close].
Check under Connectivity Protocols on the Configuration Report to verify if Netware protocol is
enabled.
enabled.