Xerox ColorQube 9201/9202/9203 Administrator's Guide

General Setup

Xerox ColorQube™ 9201/9202/9203
System Administrator Guide

20

Configuration Page

The Configuration page allows you to view device setup details, for example Network Setup and 
Workflow Scanning Setup.

Note:

These details can also be printed by clicking on the [Print Configuration Page] button.

1.

At your Workstation, open the web browser and enter the IP address of the device in the Address 
bar, and press [Enter].

2.

Click on the [Status] tab. 

3.

Select [Configuration Report] in the directory tree.

4.

To view information about a setting select the required configuration setting from the list.

5.

To print the Configuration details, click on the [Print Configuration Page] button.

Note:

The following instructions are assuming that printing a Configuration Report is open to all 

users.

The Configuration Report details the device software versions and network settings configured for the 
device. The Configuration Report automatically prints when the device is rebooted or powered on. You 
can print a Configuration Report by following the instructions below.

1.

Press the <Machine Status> button on the device. 

2.

Touch the [Machine Information] tab.

3.

Touch [Information Pages]. 

4.

Touch [Configuration Report].

5.

Touch [Print], then touch [Close].

1.

Press the <Log In/Out> button to enter the Tools pathway.

2.

Enter the Administrator’s User Name [admin], touch [Next], enter Password [1111], touch 
[Enter].

3.

Press the <Machine Status> button, then touch the [Tools] tab.

4.

Touch [Device Settings].

5.

Scroll down by touching the scroll down arrow, touch [Configuration/Information Pages].

a.

Touch the [No] button under Print Configuration at Power On.

b.

Touch [Save].

6.

Press the <Log In/Out> button, then touch [Logout] to exit the Tools pathway.

1.

Open the web browser and enter the IP address of the device in the Address bar, and press 
[Enter].