Xerox ColorQube 9201/9202/9203 Administrator's Guide
Xerox Secure Access
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
303
To Configure Xerox Secure Access on the Device
Note:
Before you complete these steps ensure that the Xerox Secure Access authentication server
has been configured to point to the device.
1.
From the Authentication Configuration screen, in the Current Configuration area:
a.
Click on the [Configure]/ [Edit] button for Device User Interface Authentication Xerox
Secure Access.
Secure Access.
b.
The device will automatically configure itself to work with the XSA remote server. If the
Authentication Solution has been configured correctly the address information should be
populated with the address of the Authentication Solution server.In the Manual Override
area, click on the [Manually Override Settings] button if the XSA remote server does not
configure automatically.
Authentication Solution has been configured correctly the address information should be
populated with the address of the Authentication Solution server.In the Manual Override
area, click on the [Manually Override Settings] button if the XSA remote server does not
configure automatically.
c.
In the Server Communication area, select either [IPv4 Address] or [Hostname], and enter
the IP Address and Port or Host Name and Port details.
the IP Address and Port or Host Name and Port details.
d.
Enter the network path to the Authentication server in the Path field.
Note:
Enter the HTTP path of [public/dce/xeroxvalidation/convauth] and port number of [1824]
to facilitate communication.
e.
In the Device Log In Method area, select one of the following:
•
Xerox Secure Access Device Only (e.g., Swipe Cards)
The XSA Device (swipe card or badge, for example) is required to be authenticated on
the device.
The XSA Device (swipe card or badge, for example) is required to be authenticated on
the device.
•
Xerox Secure Access Device + an alternative on-screen authentication method
Select to allow users to authenticate using the device's control panel in addition to the
XSA feature.
When enabled, a button labeled “Alternate Login” is displayed on the “Instructional
Blocking Window” providing users with an alternate method to log in. For example, This
feature can be enabled for users who are unable to use their swipe card. When the
alternate button is selected, the remote server presents a series of log in pages on the
printer's control panel. The remote server is still responsible for authenticating the user.
All other XSA options are supported with this setting.
Select to allow users to authenticate using the device's control panel in addition to the
XSA feature.
When enabled, a button labeled “Alternate Login” is displayed on the “Instructional
Blocking Window” providing users with an alternate method to log in. For example, This
feature can be enabled for users who are unable to use their swipe card. When the
alternate button is selected, the remote server presents a series of log in pages on the
printer's control panel. The remote server is still responsible for authenticating the user.
All other XSA options are supported with this setting.
f.
If you are using the Network Accounting feature, the Xerox device can be set to
automatically obtain accounting data for the user from the Authentication server when the
user authenticates. This reduces the number of screens that the user is presented with when
they login at the device. To implement this feature, select [Automatically apply Accounting
Codes from the server] or If you want the user to provide accounting data manually at the
user interface, select [User must manually enter accounting codes at the device].
automatically obtain accounting data for the user from the Authentication server when the
user authenticates. This reduces the number of screens that the user is presented with when
they login at the device. To implement this feature, select [Automatically apply Accounting
Codes from the server] or If you want the user to provide accounting data manually at the
user interface, select [User must manually enter accounting codes at the device].
Note:
Ensure Network Accounting is enabled and the server supports this.
g.
If you select [Xerox Secure Access Device + alternate on-screen authentication method]
for Device Log In Method, in the Device Instructional Blocking Window area, enter text in
the [Window Title (Reference 1)] field to define a title that will display on the Xerox device
screen.
for Device Log In Method, in the Device Instructional Blocking Window area, enter text in
the [Window Title (Reference 1)] field to define a title that will display on the Xerox device
screen.