Xerox ColorQube 9201/9202/9203 User Guide
Tray 4 (Bypass)
ColorQube™ 9201/9202/9203
Paper and Media
225
Loading Tray 4 (Bypass)
Your device alerts you if Tray 4 (Bypass) is selected for a job and the media requested does not match
the media currently loaded. It also warns you if the tray runs out of paper during a job.
the media currently loaded. It also warns you if the tray runs out of paper during a job.
1.
Make sure the tray is in the down
position. For larger media, use the tray
extension.
position. For larger media, use the tray
extension.
2.
Place the media on the tray. Locate
the media to the right edge.
the media to the right edge.
•
Load pre-printed paper and
labels face down and with the
top towards the front of the
device.
labels face down and with the
top towards the front of the
device.
•
Load hole punched paper with
the holes on the left.
the holes on the left.
•
Load transparencies face down with the white strip on the left.
For information about loading tabs, refer to
Paper must not be loaded above the maximum fill line.
3.
Make sure that the guides just touch
the paper.
the paper.
The paper settings for the tray are
displayed on the touch screen.
displayed on the touch screen.
The tray detects the position of the
side guide to determine the size of
the media.
side guide to determine the size of
the media.
4.
Confirm or change the settings, as
required.
required.