Honeywell QuietSet Whole Room Tower Fan - White Owner's Manual

4

On/Off
To turn fan on, press the

Power button ( )

located on the left side of the control panel.

Speed Control
The fan will automatically start on “Sleep” speed

when initially turned on. To adjust

the speed up or down, press the

button ( ) repeatedly to increase level.

Oscillation
To activate the Oscillation feature, press the

Oscillation button ( ) once.

Press the

Oscillation button again to turn the

Oscillation feature off.

Timer
Choose from 1, 2, 4, or 8 hour settings by

performing the following function:

• 1 hour: Press the

Timer button ( ) once.

• 2 hours: Press the

Timer button twice.

• 4 hours: Press the

Timer button a third time.

• 8 hours: Press the

Timer button a fourth time.

Press the

Timer button a fifth time to turn the Timer feature off.

REPLACEMENT INSTRUCTIONS
A. Remove battery door by sliding downward in direction of

arrow.

B. Insert 2 AAA batteries into the remote following the directional

guides in the recessed slots (Fig. 9). Batteries are included.

C. Replace battery door by sliding upward opposite of arrow

direction until door snaps in place.

NOTE: DO NOT MIX OLD AND NEW BATTERIES. DO NOT MIX ALKALINE, STANDARD

(CARBON-ZINC) OR RECHARGEABLE (NICKEL-CADMIUM) BATTERIES.

SEE RECYCLERS IN YOUR AREA FOR PROPER DISPOSAL OF BATTERIES.

The cord management feature is located on the back side

of the fan.
Simply double up the excess cord length, and place the two

pieces of cord in the notch (Fig 8b).
The notch will hold the cord so that the excess length will not

drag on the ground.

®

Fig. 9

Fig. 8a

Fig. 8b