Cisco Cisco Clean Access 3.5
16-5
Cisco Clean Access Server Installation and Administration Guide
OL-7045-01
Chapter 16 Upgrading to a New Software Release
Upgrading via Web Console (from 3.5.3 and Above Only)
Upgrading via Web Console (from 3.5.3 and Above Only)
If running release 3.5(3) or above of the Cisco Clean Access software, administrators have the option of
performing software upgrade on the CAS and CAM via web console:
performing software upgrade on the CAS and CAM via web console:
•
CAM web console: Administration > Clean Access Manager > System Upgrade
•
CAS management pages (in CAM web console): Device Management > CCA Servers > Manage
[CAS_IP] > Misc
[CAS_IP] > Misc
•
CAS direct web console: https://<CAS_eth0_IP>/admin
Note
•
For web upgrade, you must upgrade each CAS first, then the CAM.
•
You can always upgrade the CAS from the CAS direct web console for any release above 3.5(3).
•
Release 3.5(3) or above must be installed and running on your CAM/CAS(es) before you can
upgrade via web console.
upgrade via web console.
•
If upgrading failover pairs, refer to
.
Note the following:
•
If running release 3.5(5) or above, you can upgrade the CAS from the CAS management pages (or
CAS direct web console), and upgrade the CAM from the CAM web console.
CAS direct web console), and upgrade the CAM from the CAM web console.
•
If running release 3.5(3) or 3.5(4), you can upgrade the CAS from the CAS direct web console, and
upgrade the CAM from the CAM web console.
upgrade the CAM from the CAM web console.
•
If running a release prior to 3.5(3), you must follow the instructions in
With web upgrade, the CAM and CAS automatically perform all the upgrade tasks that are done
manually for SSH upgrade (for example, untar file, cd to /store, run upgrade script). The CAM also
automatically creates snapshots before and after upgrade. When upgrading via web console only, the
machine automatically reboots after the upgrade completes. The steps for web upgrade are as follows:
manually for SSH upgrade (for example, untar file, cd to /store, run upgrade script). The CAM also
automatically creates snapshots before and after upgrade. When upgrading via web console only, the
machine automatically reboots after the upgrade completes. The steps for web upgrade are as follows:
1.
2.
, or
3.
, and
4.
Download the Upgrade File
For Cisco Clean Access 3.5 release upgrades, a single file, cca_upgrade_3.5.x.tar.gz, is downloaded to
each Clean Access Manager (CAM) and Clean Access Server (CAS) installation machine. The upgrade
script automatically determines whether the machine is a CAM or CAS.
each Clean Access Manager (CAM) and Clean Access Server (CAS) installation machine. The upgrade
script automatically determines whether the machine is a CAM or CAS.
For Cisco Clean Access patch upgrades, the upgrade file can be for the CAM only, CAS only, or for both
CAM/CAS, depending on the patch upgrade required.
CAM/CAS, depending on the patch upgrade required.
Step 1
Log into Cisco Downloads (
) and click
the link for Cisco Clean Access Software.