Cisco Cisco Unified MeetingPlace Audio Server Installation Guide
Cisco MeetingServer 5.1 Installation Planning Guide
125
Cisco Systems
March 2003
Worksheet 4-7
Port Groups
Organizing ports into groups is a convenient way of configuring multiple
ports at one time.
ports at one time.
Field
Default Value
Options
Your Value
Group Information
1.
ID number
0 for PSTN, 1 for
IP
IP
Numeric—0 to 31.
Group Characteristics
2.
Active?
Yes
Yes or No.
3.
Provider
Alphanumeric. 0 to 32.
4.
Circuit ID
Assigned by the circuit
provider.
provider.
5.
Card type
Based on system
configuration
configuration
T1, E1, IP, or None
(unassigned).
(unassigned).
T1, E1, IP, or None
6.
Signaling protocol
Based on system
configuration
configuration
For T1: Loop Start, Ground
Start, E&M Wink Start,
Clear Channel; or Protocol
Table for any AudioCodes-
supported integration such as
ISDN-PRI.
Start, E&M Wink Start,
Clear Channel; or Protocol
Table for any AudioCodes-
supported integration such as
ISDN-PRI.
For E1: Any E1 for any
Aculab-supported integration
such as Euro ISDN or
DPNSS; or Protocol Table
for any AudioCodes-
supported integration such as
Euro ISDN or QSIG.
Aculab-supported integration
such as Euro ISDN or
DPNSS; or Protocol Table
for any AudioCodes-
supported integration such as
Euro ISDN or QSIG.
7.
# of DID digits expected
4
Numeric—0, or 2 to 6.
8.
Mtg ID for direct mtg
access or Default digits
for system
access or Default digits
for system
Meeting ID number based on
your Minimum mtg ID length
(min) parameters.
your Minimum mtg ID length
(min) parameters.
9.
Default access type
Combined
DID
Meeting, MeetingNotes,
Profile, Combined Access, or
Loop Through Transfer.
Loop Through Transfer.
10.
Language
English (USA)
English (USA) plus any
additional languages installed
additional languages installed
11.
Human assistance?
No
Yes or No.
12.
Flash transfer?
No
Yes or No.
13.
Outdial?
Yes
Yes or No.