Cisco Cisco Unified MeetingPlace Audio Server Installation Guide
Cisco MeetingServer 5.1 Installation Planning Guide
126
Cisco Systems
March 2003
Port Groups Fields
1.
ID
Number
A number from 0 to 31 that identifies this port group. This number is
predefined. The default port group for PSTN is 0; the default port group for
IP is 1.
predefined. The default port group for PSTN is 0; the default port group for
IP is 1.
Assign every line coming into MeetingPlace to a port group.
2.
Port
Active?
Whether to use this port group definition. You may want to define port
groups now for later use.
groups now for later use.
Most likely, port groups are always active. You may wish to make port
groups inactive during servicing.
groups inactive during servicing.
3.
Provider
An abbreviation that identifies the service provider.
4.
Circuit
ID
A number assigned by the circuit provider that identifies the circuit.
5. Card type
Whether this trunk is a digital T1, E1, IP, or unassigned.
6.
Signaling
protocol
The signaling type used by this trunk (U.S./Canada).
7. # of DID digits expected
The number of digits sent by the PBX or network.
8. Mtg ID for direct mtg access or Default
digits for system
digits for system
The meeting that callers to this port will attend when DID/DDI digits = 0 and
the default access type is DID Meeting.
the default access type is DID Meeting.