Cisco Cisco Unified MeetingPlace Audio Server Installation Guide
Cisco MeetingServer 5.1 Installation Planning Guide
29
Cisco Systems
March 2003
Figure 3-1 How MeetingPlace M3 Connects to Other Business Systems
Selecting a Site
The MeetingPlace M3 system hardware is designed to be installed typically
in an equipment room
in an equipment room
for example, a PBX or computer room. The location
must not only meet the MeetingPlace system’s environmental and power
requirements, but also allow you to connect the system to the telephone
network and LAN.
requirements, but also allow you to connect the system to the telephone
network and LAN.
The rest of this section provides the information you need to:
•
Select a MeetingPlace location that fulfills the system’s operating
requirements.
requirements.
•
Mount MeetingPlace properly in the location you select.
•
Decide whether additional power outlets, cables, or other equipment will
be required to accommodate the system.
be required to accommodate the system.
•
Obtain any necessary cables and other hardware not supplied with the
system.
system.