Cisco Cisco Unified MeetingPlace Audio Server Installation Guide
Cisco MeetingServer 5.1 Installation Planning Guide
60
Cisco Systems
March 2003
Worksheet 3-4 MeetingPlace IP Gateway Requirements
System
Description
9
9
9
9
1.
Windows Server
Requirements
Requirements
Windows server with the following minimum
requirements:
requirements:
−
450 MHz Pentium III
−
256 MB RAM, 4GB disk space
Windows 2000 or Windows NT 4.0 (requires service
pack 4.0 or later)
pack 4.0 or later)
Network Interface Card
CD-ROM drive
Microsoft Windows Networking Support
TCP/IP protocol
One primary IP address for communication with the
MeetingPlace server and Cisco CallManager server.
MeetingPlace server and Cisco CallManager server.
Note: If the MeetingPlace IP Gateway and MeetingPlace
Web are installed on the same system, you will require an
extra IP address assigned to MeetingPlace Web (i.e.,
resulting in two IP addresses). Please refer to the
MeetingPlace IP Gateway System Manager’s Guide for
more information.
Web are installed on the same system, you will require an
extra IP address assigned to MeetingPlace Web (i.e.,
resulting in two IP addresses). Please refer to the
MeetingPlace IP Gateway System Manager’s Guide for
more information.
2.
MeetingPlace Server
Requirements
Requirements
MeetingPlace M3 platform with MeetingServer 5.0 and
higher
higher
One primary IP address for communication with the
MeetingPlace IP Gateway Windows server and other
gateways and clients
MeetingPlace IP Gateway Windows server and other
gateways and clients
Extra IP addresses for every 48 user licenses of IP. (For
example, if you have 96 user licenses of IP, you will
require two secondary IP addresses. On a MeetingPlace
M3 platform, this means one additional IP address per
IP Access Blade).
example, if you have 96 user licenses of IP, you will
require two secondary IP addresses. On a MeetingPlace
M3 platform, this means one additional IP address per
IP Access Blade).
3.
CallManager
Requirements
Requirements
Cisco CallManager (version 3.0 or later) configured to
route calls to the MeetingPlace IP Gateway Windows
server.
route calls to the MeetingPlace IP Gateway Windows
server.
Note: Cisco CallManager 3.0 supports up to 250 IP
connections. For the full complement of 384 IP connections,
you must be using CallManager 3.1.
connections. For the full complement of 384 IP connections,
you must be using CallManager 3.1.
4.
Network
Requirements
Requirements
The MeetingPlace system and MeetingPlace IP Gateway
must be located on the same subnet.
must be located on the same subnet.
The Windows server must be inside the corporate
firewall and able to access the CallManager system
firewall and able to access the CallManager system