Cisco Cisco Unified MeetingPlace Audio Server Installation Guide
Cisco MeetingServer 5.1 Installation Planning Guide
31
Cisco Systems
March 2003
U.S.
Canada
clearance in back
of the unit
of the unit
outlet installed within
8 feet of the unit
8 feet of the unit
Hong Kong
European Union
61 cm of clearance
in back of the unit
in back of the unit
230VAC BS-1363
socket-outlet
installed within
2 meters of the unit
2 meters of the unit
Japan
61 cm of clearance
in back of the unit
in back of the unit
100 VAC (50 Hz
for East Japan; 60
Hz for West Japan)
for East Japan; 60
Hz for West Japan)
NEMA 5-15R socket-
outlet installed within
2 meters of the unit
outlet installed within
2 meters of the unit
Mounting the MeetingPlace M3 Server
The M3 server can be mounted in either an open or closed rack/cabinet. You
will require a MeetingPlace 19-inch or 23-inch EIA or Frame Relay rack
mount kit for this purpose.
will require a MeetingPlace 19-inch or 23-inch EIA or Frame Relay rack
mount kit for this purpose.
To avoid hazards arising from uneven mechanical loading of the rack, plan
your installation so that (within the limits of equipment and cabling):
your installation so that (within the limits of equipment and cabling):
•
The weight of the equipment is evenly distributed in the rack
•
The heaviest units are mounted towards the bottom of the rack
Guidelines for mounting the MeetingPlace M3 server are provided in the
MeetingServer Customer Engineer Guide.
MeetingServer Customer Engineer Guide.
Attaching to the Telephone Network
Note: This equipment has been tested and found to comply with the limits
for a Class A digital device pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense.
for a Class A digital device pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense.