Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
4-69
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 4 Configuring the 8112 Server
Configuring the system
Figure 4-71 Setting IP Address for 960 IP Ports
Step 7
Type the correct slot number for the blade you want to modify and press Enter. In this configuration, it
is slot 16 so type
is slot 16 so type
16
and press Enter.
Step 8
Continue pressing Enter until you are prompted to enter the IP address as in line 15 of
Step 9
Enter the correct IP address and continue pressing Enter until you are prompted with the “blade”
configuration menu.
configuration menu.
Step 10
Type
2
and press Enter to modify a blade. A prompt for the blade slot to modify appears, as shown in
line 8 in
Step 11
Type
15
and press Enter to select the blade in slot 15.
Note
shows slot 16 but you have already configured slot 16, so you should select slot 15
now.
Step 12
Continue pressing Enter until you are prompted to enter the IP address as in line 15 of
***** B L A D E C O N F I G M E N U *****
1) View blade details
2) Modify blade
x) Exit program
Enter command: 2
Enter blade slot [1..16]: 16
Type [IP]:
Card Type [ TP1610]:
Port Group [ 1]:
Number of Ports [480]:
1st Port [ 0]:
IP address [0] [0.0.0.0]: 10.10.10.10
IP address [1] [0.0.0.0]: 10.10.10.11
Subnet Mask [0.0.0.0]: 255.255.255.0
Default Gateway [0.0.0.0]: 10.10.10.1
Base UDP Port [0] [ 5000]:
Base UDP Port [1] [ 6000]:
Jitter Buffer Minimum Size [ 100]:
Jitter Buffer Optimization [ 7]:
IP Precedence [0]:
Type of Service (TOS) [ 0]:
DSCP / DiffServ [unused]:
RTCP Interval [default]: