Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
4-101
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 4 Configuring the 8112 Server
Testing the installation
Step 13
Repeat this procedure using a seven digit number (you may need to add a “9” along with the seven digits
if connected to a PBX) to place a call to the public network.
if connected to a PBX) to place a call to the public network.
Step 14
Enter
0
and press Enter to exit the “activity” command.
Troubleshooting telephony configuration
To troubleshoot the telephony testing, follow these steps.
Step 1
Check that the worksheet information was correctly entered into MeetingTime.
Step 2
Check all the physical connections to the system.
Step 3
Check that no LEDs are in a bad state. Refer to the
for an explanation of the LEDs.
Step 4
If you made any changes to the MeetingTime configuration, access the CLI and type
restart
and press
Enter.
Step 5
After the system comes back up, repeat the testing procedures.
If these actions do not correct the problem, contact the Cisco TAC.
Testing scheduling
Beyond basic telephony functionality, verify that users can schedule new meetings. When testing
scheduling capability, use the technician profile that shipped with the system.
scheduling capability, use the technician profile that shipped with the system.
Testing voice interface
Step 1
Verify that you can schedule immediate meetings via the phone interface.
Step 2
Verify you can attend that scheduled meeting.
Step 3
Verify that you can schedule a future meeting via the phone interface.
Testing MeetingTime
Verify you can schedule a meeting via MeetingTime.
Testing MeetingPlace Web
If MeetingPlace Web has been installed, verify that meetings can be scheduled via this interface.