Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
7-2
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 7 Installing a Shadow Server
Verifying requirements
Verifying requirements
Before beginning any work with the shadow server, verify each requirement below. Also, refer to the
MeetingPlace Audio Server 5.2 System Manager’s Guide for a complete list of requirements.
MeetingPlace Audio Server 5.2 System Manager’s Guide for a complete list of requirements.
•
MeetingPlace server requirements:
–
The primary server must be running MeetingPlace Audio Server version 5.1 or higher.
–
The shadow server must be running MeetingPlace Audio Server version 5.1 or higher with a
clean database.
clean database.
•
License requirements:
–
Each shadow server must have a shadow server license.
•
Network requirements:
–
All TCP ports need to be open between the primary server and the shadow server.
–
UDP and ICMP ports can be blocked, but IP ports need to be open.
•
System up/down requirements:
–
The primary server must have a scheduled restart one time to configure the shadow server.
Obtaining the necessary information
Fill in the “Value” columns in
and
. You need this information before installing the
shadow server.
Physically installing the shadow server
Before physically installing the shadow server, confirm that all requirements have been met by referring
to the MeetingPlace Audio Server 5.2 System Manager’s Guide.
to the MeetingPlace Audio Server 5.2 System Manager’s Guide.
Table 7-1
Primary Server Network Information
Information Needed
Value
IP address
host name
Table 7-2
Shadow Server Network Information
Information Needed
Value
IP address
host name
ethernet address
default gateway address
subnet mask address
IP address of NTP servers